403200 Bit Holders & Extensions
Magnetic Drive Bit holders are designed to suit 25mm Insert Bits and 30mm Internal Hex Insert bits. They are designed to be fitted directly into the end of a electric or battery operated screwdriver, impact driver or a drill chuck. Using a bit holder reduces costs as they allow for more economical shorter 25mm driver bits to be used. Not suitable for use with Power bits.
• Cost reductions as the more economical shorter 25mm driver bits are used
• Available in a range of lengths makes installing in difficult to access areas easier
• Made from High Quality steel for longer life
• Available in a range of lengths makes installing in difficult to access areas easier
• Made from High Quality steel for longer life
1/ Select the correct type and size driver tip to suit the fastener to be driven and fit it to your power drill or screw driver or hand tool. If power driving ensure the correct speed is set on the tool.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Note:-
Always check the driver bit size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Note:-
Always check the driver bit size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
Note:-
Always check the driver bit size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
Always check the driver bit size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
| Size | Pack Type | 490 Y Description/Features | Code |
|---|---|---|---|
| 1/4" x 75mm |
|