172020 Stainless Steel Self-Tapping - Pan Head
Recommended for fixing into timber or sheet metal in corrosive environments or where a long life fastener is required. Made from 300 Series Stainless Steel provides a long life, aesthetically pleasing, bright shiny silver finish with high hygienic benefits. Can by power or hand driven. If fastening into metal ensure it is compatible with Stainless Steel Self-Tapping screws.
• An economical general purpose stainless steel fastener which can perform as a self-drilling screw in medium density timbers and very popular when used as a self tapping screw for Sheetmetal applications
• High Corrosion Resistance
• High Fire and Heat Resistance - Retains strength under harsh and extreme temperature conditions
• Hygienic- Easy to clean and sanitise
• Impact Resistance and strength - extremely tough and highly durable material with high impact resistance
• Aesthetic appearance
• Available in a wide range of sizes and lengths
• High Corrosion Resistance
• High Fire and Heat Resistance - Retains strength under harsh and extreme temperature conditions
• Hygienic- Easy to clean and sanitise
• Impact Resistance and strength - extremely tough and highly durable material with high impact resistance
• Aesthetic appearance
• Available in a wide range of sizes and lengths
1/ Ensure the correct driver tool is fitted to your power drill or screw driver. Can also be driven by hand screw driver.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ If necessary push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 800~1,000 r.p.m.
Note:-
Hardwoods may require a pilot hole to be pre-drilled as this will assist the screw in tapping a thread whilst reducing timber splitting and driving torque.
Sheet metal must be pre-drilled with a pilot hole.
For information on the correct size pilot hole to drill refer to our Technical data section for Self Tapping Screws.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ If necessary push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 800~1,000 r.p.m.
Note:-
Hardwoods may require a pilot hole to be pre-drilled as this will assist the screw in tapping a thread whilst reducing timber splitting and driving torque.
Sheet metal must be pre-drilled with a pilot hole.
For information on the correct size pilot hole to drill refer to our Technical data section for Self Tapping Screws.
• For general fastening to timber and thin metal where a long life fastener is required
• Can be used in plastic plugs and spaghetti when fixing into masonry
Ideal for use in:-
• highly corrosive environments
• professional and domestic kitchen e
• Can be used in plastic plugs and spaghetti when fixing into masonry
Ideal for use in:-
• highly corrosive environments
• professional and domestic kitchen e
| Size | Pack Type | 480 Y Material | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|
| 4g x 3/8" (10mm) |
|
||||
| 4g x 1/2" (12mm) |
|
||||
| 4g x 5/8" (16mm) |
|
||||
| 4g x 3/4" (20mm) |
|
||||
| 4g x 1" (25mm) |
|
||||
| 6g x 3/8" (10mm) |
|
||||
| 6g x 1/2" (12mm) |
|
||||
| 6g x 5/8" (16mm) |
|
||||
| 6g x 3/4" (20mm) |
|
||||
| 6g x 1" (25mm) |
|
||||
| 6g x 1 1/4" (32mm) |
|
||||
| 6g x 1 1/2" (38mm) |
|
||||
| 8g x 3/8" (10mm) |
|
||||
| 8g x 1/2" (12mm) |
|
||||
| 8g x 5/8" (16mm) |
|
||||
| 8g x 3/4" (20mm) |
|
||||
| 8g x 1" (25mm) |
|
||||
| 8g x 1 1/4" (32mm) |
|
||||
| 8g x 1 1/2" (38mm) |
|
||||
| 8g x 1 3/4" (45mm) |
|
||||
| 8g x 2" (50mm) |
|
||||
| 10g x 1/2" (12mm) |
|
||||
| 10g x 5/8" (16mm) |
|
||||
| 10g x 3/4" (20mm) |
|
||||
| 10g x 1" (25mm) |
|
||||
| 10g x 1 1/4" (32mm) |
|
||||
| 10g x 1 1/2" (38mm) |
|
||||
| 10g x 1 3/4" (45mm) |
|
||||
| 10g x 2" (50mm) |
|
||||
| 12g x 3/4" (20mm) |
|
||||
| 12g x 1" (25mm) |
|
||||
| 12g x 1 1/4" (32mm) |
|
||||
| 12g x 1 1/2" (38mm) |
|
||||
| 12g x 2" (50mm) |
|