Magnetic Nutsetters feature a magnet inside the Hex Drive to hold the screw in the nutsetter whilst it is being positioned onto the materials to be fastened. For 6g & 8g screws use a 1/4” Hex Nutsetter, for 10g &12g screws use a 5/16” Hex Nutsetter and for 14g screws use a 3/8” Hex Nutsetter (Shedmates™ & Storm-Mates™ Skylight screws use a 5/16” Hex Nutsetter)

Phillips Drive bits are available in single end or double end styles. 25mm bits can be used with Magnetic Bit Holders whereas longer sizes are inserted directly into the drill or screwdriver chuck. Use #1 bits for 4 gauge screws, #2 bits for 5, 6, 7, 8 & 10 gauge screws and #3 for 12 & 14 gauge screws.

Robertson Square Drive bits are available in 25mm lengths to be used with Magnetic Bit Holders or as longer sizes which are inserted directly into the drill or screwdriver chuck. Use #1 bits for 7 gauge Trim Head Steelmates® screws and #2 bits for 10 gauge Stainless Steel Deckmates™ screws.

Internal Hex Drive bits are specifically for use with Bugle Batten Timbermates. One size suits all Zinc Yellow, Class 3, Class 4 and Stainless Steel Bugle Batten screws. May be used with Magnetic Bit Holders or inserted directly into the drill or screwdriver chuck.

Magnetic Drive Bit holders are designed to suit 25mm Phillips or Robertson Square Drive Bits. Can also be used for 30mm Internal Hex Drive bits. To be inserted directly into the drill or screwdriver chuck.