Hex Head - Fully Threaded
Designed for fixing into timber these screws feature a Type 17 self-drilling point. Ideal for attaching signs, brackets etc to timber. Can also be used to self drill through thin sheet metal up to 0.8mm and into timber. Always use Class 3 for external use or when fixing into treated timbers.
Applications include valley fixing wall cladding or fencing profiles to timber. Available with Painted* heads to match Colorbond® wall cladding & fencing sheet colours.
These screws are ideal for applications attaching signs or brackets etc., to timber. Commonly used for fixing thin metal battens to timber trusses and also for attaching rail-clips for concealed fixing roofing profiles to timber battens.
*Colorbond® is a Registered Trade Mark of Bluescope Steel Ltd. *A Painting Surcharge is Applicable, refer to Painted Screws section.
12 x 25, 30, 35 or 40mm Hex Timbermates® for fixing metal roof battens to timber trusses
Timbermates® are used extensively for fixing thin metal roof battens to timber trusses. Varying lengths can be used
dependent upon the local wind conditions, terrain category etc., and the type of timber trusses being fixed into.
Hex Head - Part Threaded
Designed for fixing into timber these screws feature a Type 17 self-drilling point. The unthreaded section of the shank greatly assists in allowing two or more pieces of timber to be pulled tightly together where there are air gaps present due to bowed timber etc., Always use Class 3 for external use or when fixing into treated timbers.
Timbermates® for fixing into timber
Timbermates® can be used in a wide variety of applications. Indoor & Outdoor furniture, pergolas, cubbys, fences, signs
or anywhere where a connection to timber is required. Timbermates® can be driven full length into the material being
fixed to subject only to driving torque constraints.
Hex Head with Seal - Fully Threaded
Ideal for attaching sheet materials to timber. The Seal Assembly provides the added benefit of rainproofing when used externally.
Typical applications include valley fixing wall cladding, (metal, fibreglass or polycarbonate), or fencing profiles to timber girts. The Seal Assembly provides the added benefit of rainproofing when used externally. Available with Painted* heads to match Colorbond® steel colours.
Hex Head with Seal - Part Threaded
Typical applications include crest fixing roofing profiles, (metal, fibreglass or polycarbonate), to timber battens or to light gauge metal battens . Use 50mm for corrugated & 65mm for square rib profiles. Available with Painted* heads to match Colorbond® steel colours.
Hex Head with Seal - Crest-Lok™
For crest fixing roofing profiles to timber or light gauge metal battens. Use 50mm for fixing corrugated profiles to timber or thin metal battens or for square rib profiles to thin metal battens. Use 65mm for fixing square rib profiles to timber battens. Available with Painted* heads to match Colorbond® roofing.
Polycarbonate Roofing Screw Assembly - Hex Head with Polycarb Washer
For crest fixing polycarbonate roof sheets to timber battens or light gauge metal battens. Use 65mm long screws for profiles with higher crests. The 50mm screw can also be used for valley fixing in walling applications. Assembled with Polycarb Sealing Washers.
Mini Corry Mates™
Specially designed for valley fixing Mini Corrugated profiles to timber. Available with Painted* heads to match Colorbond® steel colours.
Timbermates® for crest fixing roofing profiles.
Timbermates® with EPDM Seals are designed for crest fixing roofing profiles into timber or thin metal battens.
Use 12 x 50mm long screws for corrugated profiles and 12 x 65mm long for square rib profiles.
Available with Crest-Lok™ feature or plain shank and in Class 3 or Class 4 coating dependent upon the environment.
Wafer Head
Features a Low profile head for use where a near flush finish is required. Commonly used for attaching metal clips for concealed-fix roofing profiles to timber battens. Use 45mm if there is an insulation blanket.
Pan Head - Fully Threaded
Ideal for attaching brackets, fittings, saddles etc., to timber. The Pan head provides a deep, positive recess for easy driving and can easily be driven by hand or with a power tool.
Bulge Rib Head Batten srews - Part Threaded
Ideal for fixing timber to timber in pergolas, outdoor furniture, timber battens to timber roof trusses, etc. They feature a 5mm Internal Hex (Allen Key) drive and a self-countersinking Bugle Rib head making them very easy to drive & countersink. Best driven with a high torque, low speed power drill. Use Class 3 for external applications or when fixing in treated timbers.
Countersunk Head
Ideal for attaching hinges to timber or timber to timber applications. Use Class 3 for external applications or when fixing in treated timbers.
Countersunk Rib Head
These screws feature self countersinking ribs under the head and are ideal for attaching fibre cement sheets, panels or boards to timber. May also be used for fixing timber & composite boards to timber.
